Installation Guide
37
Tools Needed:
•
Tool for drilling
•
Tool for screwing
Follow the steps to mount the dome with the Mini Pendant Mount.
1)
Make a cable entry hole on the wall to recess the cables. Otherwise, users
could push up the cable entry board on the Mini Pendant Mount’s
mounting plate to place the cables, as shown in the photo below.
2)
To avoid insects entering the pendant mount, you could block the cable
entry hole with the supplied sponge in two ways. See the illustrations
below.
3)
Thread the cables through the Mini Pendant Mount and fix the pendant
mount on the wall with proper screws and screw anchors (not supplied).
4)
If use an outdoor dome, attach the waterproof rubber to the Mini Pendant
Mount.
5)
Thread the cables through the top holder and fix it to the Mini Pendant
Mount with the supplied screws and washers.
6)
Connect the cables to the dome camera. Then attach the dome to the top
holder and fix them with the supplied screw.
Cable Entry Board
Mounting Plate
Sponge
Sponge
