Installation
Guide
16
Decimal Digit Single Digit
NOTE:
The number “0” should locate upwards as shown in the
diagram above for correct switch definition.
3.4
Dome Cable Definition and Requirements
For operation, the integrated dome camera requires the video cable to carry
the video signals to the remote viewing site, power cable to power the dome
and RS485 data cable to carry commands from the control device.
3.4.1 Cable
Requirements
For operation, the integrated high speed dome cameras require video and
data cables as described below:
•
The video cable sends video signals to a remote viewing site. Using a
coaxial cable to send video signals is recommended.
•
RS-485 cable carries commands from a control device to the dome
cameras. A CAT 5, 24 gauge cable is recommended.
•
The power cable provides either AC 24V or DC 12V power supply to the
dome.
NOTE:
Ensure power supply corresponds with the dome’s power
requirement, or product impairment will occur. If any mistake happens,
please contact with a qualified maintenance engineer.
3.4.2
22-Pin Data Cable
DC 12V Data Cable
Power Input
DC12 Female Jack
Video
Output
BNC Connector
RS485
Connector
2 wires
