1
INTRODUCTION
/Zoom) Control
z
With RS-485 communication, max. 255 of cameras can be controlled at the same time.
o-P protocol can be selected as a control protocol in the current version of firmware.
to display the status of camera and to configure the functions interactively.
d Preset can be displayed on
elays are available.
n be set to move to the corresponding Preset position.
Meanwhile, the output relay can be matched to some specific Preset positions to do counteractions
such as turning on the light or sound the alarm.
z
Most camera characteristics can be set up easily and directly with reserved preset, not entering
PTZ(Pan/Tilt
z
Pelco-D or Pelc
OSD(On Screen Display) Menu
z
OSD menu is provided
z
The information such as Camera ID, Pan/Tilt Angle, Alarm I/O an
screen.
Alarm I/O Functions
z
4 alarm sensor Inputs and 2 alarm Output r
z
To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo
coupler and the relay is used for alarm output.
z
The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications.
Meanwhile, the maximum load of relay contact is AC 250V, 3A or DC 28V, 3A.
z
If an external sensor is activated, camera ca
Reserved Presets for Special Purpose
into OSD menu. For more information, refer to “Reserved Preset” in this manual.
6/47
Speed Dome Camera Instruction Manual
