Press the
Display cycle button
on front panel once more, LCD will display
as follows:
Here display the UPS output voltage parameter, this numerical value can inspect
UPS output voltage variety, from 0V~290V.
Press the
Display cycle button
on front panel once more, LCD will display
as follows:
Here display the UPS output frequency parameter, this numerical value can inspect
UPS output frequency variety, from 0HZ~60HZ.
Press the
Display cycle button
on front panel once more, LCD will display
as follows:
Here display the UPS pile charge voltage or discharge voltage parameter, this
numerical value can inspect UPS pile capacity variety, from 0%-100%.
OUTPUT VOLTAGE
220.0V
OUTPUT VOLTAGE
220.0V
OUTPUT FREQUENCY
50.0HZ
OUTPUT FREQUENCY
50.0HZ
BATTERY CAPACITY
100 %
BATTERY CAPACITY
100 %
Press the
Display cycle button
on front panel once more, LCD will display
as follows:
10
11
TRUE ON LINE UPS
TRUE ON LINE UPS
Here display the UPS output load capacity parameter, this numerical value can
inspect UPS take load capacity variety, from 0%~200%.
LOAD CAPACITY
100 %
LOAD CAPACITY
100 %
If no main power, with main power but no bypass output, battery voltage low,
overload, overheat, inside circuit fault, output short circuit etc, LCD will display
relative content.
Like overload:
SYSTEM FAULT
BYPASS OUTPUT
SYSTEM FAULT
BYPASS OUTPUT
And like no main power input:
SYSTEM NORMAL
BATTERY IN USE
SYSTEM NORMAL
BATTERY IN USE
Press the
Display cycle button
on front panel once more, LCD will display
as follows:
Here display the input main power frequency parameter, this numerical value can
inspect main power frequency variety, from 0HZ~60HZ.
INPUT FREQUENCY
50.0HZ
INPUT FREQUENCY
50.0HZ
