CBC CL-301, Instruction Manual

Page: 7 / 8

LENS MOUNTING
AUTO IRIS MODE SELECTION
BACK FOCUS ADJUSTMENT If back focus has to be adjusted after mounting
the lens, (1) loosen the back focus lock screw on
the left side of the camera with a (+) screwdriver,
(2) turn the back focus adjustment screw on the
right side of the camera with a (-) screwdriver until
the desired focus is reached, (3) tighten the back
focus lock screw.
Remove the CCD cover. Then
attach the CS mount lens to
the camera. Please refer to the
drawing on the left.
CAUTION
Be cautious not to use Auto
Iris Lens with over 75mA
SYNC
BLC
AGC
W/B
L.L INT
ON OFF
ON OFF
AWB ATW
1
2
3
4
DIP SWITCH
SETTING
No. NAME POSITION FUNCTION
1
Synchronization mode L.L. Line lock mode
(SYNC) INT. Internal synchronization mode
2
Back light compensation ON sets to this position when strong light comes in behind the target
(BLC) OFF normal position
3
Auto gain control ON AGC level varies from 0dB to maximum 20dB
(AGC) OFF normal position
4
White balance AWB adjusts WB automatically and fixes it in 5sec
(WB) ATW tracks and adjusts WB automatically
DC IRIS LEVEL
ADJUSTMENT
POSITION LENS
DC DC iris lens
AES Manual or fixed iris lens
VIDEO Video iris lens
DC iris level is preset in the
factory. Only if necessary, adjust
the DC iris level to achieve the
proper picture with AGC off.
factory setting
DIP switch on the left side of the camera
allows you to set the functions of the camera.
Please refer to the following table.
Set the auto iris mode selection
switch to the position that
corresponds to the lens which is
mounted to the camera.
Please refer to the table on the left.
EG-7
DC
VIDEO
AES
screw
screw
1 3
2
1
2
DC IRIS