INSTALLATION
CONNECTION OF POWER SUPPLY CABLE
Connect to the 12VDC
power supply. Please refer
to the drawing on the left.
NOTE
When using DC power, check for
proper polarity before connecting
to power supply.
Connect to the 24VAC
power supply. If necessary,
adjust the line phase to
synchronize the image.
Please refer to the drawing
on the left.
LINE PHASE ADJUSTMENT
If necessary, adjust the line phase to
synchronize the image by pressing
PHASE adjustment button.
NOTE
In case 12VDC power supply is used, this
function is not available.
NOTE
In case the line phase cannot be adjusted
(Phase difference is more than 180
0
),
exchange the polarity of AC power input.
EG-6
PHASE
GND
+12VDC
12VDC
AC24V
CLASS 2
ONLY
24VAC
class 2 only
Summary of Contents for CL-301
Page 1: ......
