6
swig
MINI BAR
Made in Vietnam - r03
Page 3 of 7
Fit dowels of
partition
and
left/right side panels
into corresponding holes of
bottom panel
as
shown. Secure
bottom panel
with 6
bolts
, 6
spring washers
and 6
flat washers
as shown,
using an
phillips head screwdriver
.
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
5
7
8
With the assistance of another adult, carefully
position unit upright. Slide
back panel
into
grooves of assembled unit as shown.
bottom
panel
bolt
flat washer
back
panel
right side
panel
A) Fit dowels of assembly into corresponding holes
of
right fixed shelf
as shown. Secure
cams.
B) Fit dowels of
crossbar
into corresponding holes
of assembly as shown. Secure
cams.
C) Fit dowels of
right side panel
into
corresponding holes of
right fixed shelf.
Secure
cams.
D) Fit dowels of
crossbar
into corresponding
holes of
right side panel.
Secure
cams.
Fit dowels of
left side panel and partition
into
corresponding holes of
left fixed shelf
as shown.
Using a screwdriver, turn each
cam
clockwise until
it securely engages each cam screw.
partition
left side
panel
left fixed
shelf
right fixed
shelf
crossbar
NOTE: Make sure plastic
piece on crossbar faces up
and bends towards the back
of assembly as shown
NOTE: Do not over
tighten the bolts
NOTE: Make sure grooves
of left side panel and
partition are assembled
on the same side
NOTE: Make sure cams
are positioned towards
the bottom of assembly
as shown
A
B
C
D
