saga
CREDENZA
Made in Vietnam - r08
Page 5 of 5
cleaning & care
Clean surfaces with a dry or damp soft
cloth. Do not use abrasive cleaners. Do
not use furniture wax or polish as the unit is
finished with a protective clear lacquer. It is
recommended to use coasters to protect
surface from heat and water.
weight limitations
This credenza is suitable to hold and not
exceed a 14-16 inch conventional TV and a
30-40 inch flat screen TV evenly distributed.
A
C
D
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential to
use wall anchors appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever possible.
A) Attach 2
mounting brackets
to top of unit using 2
small screws
per bracket.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the mounting bracket mounted to the back of
the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a
hole in the wall that is slightly smaller in diameter than the anchor.
Gently tap the
plastic anchor
until the flange of the anchor is flush
with the wall.
D) Attach 2
mounting brackets
to the wall by inserting 2
large
screws
through each mounting bracket and into the wall anchor in
the wall.
E) Place the unit so the mounting brackets on the back edge are
aligned with the wall brackets.
F) Lace one end of the
wall strap
through both brackets, and into the
other end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
F
optional wall mounting assembly
WALL
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com