9
10
12
11
saga
CREDENZA
Made in Vietnam - r08
Page 4 of 5
Fit dowels of assembled unit into corresponding
holes of
top panel
as shown. Secure all
cams
in
side panels
and
top partition
.
A. Fit top of
door front (A)
up into back groove of
top panel
as shown. Fit bottom of
door front (A)
into back groove of
bottom panel
as shown.
B. Fit top of
door front (B)
up into front groove of
top panel
as shown. Fit bottom of
door front (B)
into front groove of
bottom panel
as shown.
Assembly is now complete.
NOTE: Make sure the grooves
of top panel are facing the same
grooves of bottom panel during
assembly
With assistance of another adult, position unit
upright. Slide
back panel
into corresponding
grooves of
left and right side panels
as shown.
back panel
top panel
door front A
door front B
A
B
A
B
A. Attach
large handle
to
door front (A)
with 3
handle screws
as shown, using a screwdriver.
Do not over tighten the screws.
B. Attach
small handle
to
door front (B)
with 3
handle screws
as shown.
door front A
door front B
large handle
small
handle
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
