3
BICYCLE ASSEMBLY
Your bike comes approximately 95% assembled.
Although assembly requires just a few steps, we strongly suggest that you have your local bike
shop professional do this for you.
Once the bicycle is assembled and before your first ride, please be sure to read the manual
completely.
WARNING:
Bicycling can be a hazardous activity even under the best of
circumstances. Proper assembly and maintenance of this bicycle is your
responsibility, as it helps reduce the risk of injury. Riding a bicycle which is
improperly assembled or maintained can result in possible injury or death.
BEFORE YOU START
Review these instructions completely. Note that the directions left, right, front and rear are used
here as seen by a rider while seated on the bicycle.
TOOLS
You will need the following tools:
scissors/knife
15mm pedal wrench
6mm metric hex wrench
screwdriver
PREPARATION
Review this manual in its entirety.
Remove the bicycle and parts box from the shipping box. Check to make sure that no parts
remain in the box.
If unattached, carefully remove the front wheel, which is attached to the side of the bicycle for
shipping.
Carefully remove all other packing material from the bicycle. This includes all zip ties, axle caps
and material protecting the frame. You can cut the zip ties with scissors, a knife, or with wire
cutters.
