rev. 2 – 09/06/2009
3/6
DRAWING OF THE EQUIPMENT
CHARACTERISTICS
Model Spits
Chickens Width Depth Height Voltage Power
E-6P
2
6
700 mm
360 mm
530 mm
230V~
2800 W
E-8P-S2
2
8
880 mm
470 mm
530 mm
230V~
3500 W
E-12P-S3
3
12
880 mm
470 mm
710 mm
230V 3~
400V 3N~
5000 W
INSTALLATION
Installation, commissioning and repairs must only be carried out by a qualifed and approved service
engineer , and with careful reference to the following instructions:
-
Take the appliance out of its packaging.
-
Remove the protection flm; in case of any residues of adhesive, use an appropriate
solvent and then dry.
-
The serial number label is set on the rear of the appliance and indicates if the machine
can be supplied with the available tension. The electrical connection must be in
accordance with the stated requirements on the data plate fxed to the rear panel of the
appliance.
- When the appliance is in operation ensure that the voltage does not vary from the fxed
value by more then +/-10%.
-
According to the rules in force the equipment installation must be done by an Omni
polar switch between power grid and equipment with a contacts opening of at least 3
mm. for each pole. The switch must be easily accessible.
-
Make sure that the appliance is in a perfectly level position by regulating the feet, if
necessary.
-
Use an appropriate lagging by setting the appliance near infammable walls and
furniture; fre prevention prescriptions must be followed very strictly. Leave a free space
of at least 15 cm from infammable side walls and back.
-
The equipment installation must be done in the respect of local prescriptions and
according to the European rules in force.
Fig. 1
Summary of Contents for E-6P
Page 2: ...rev 2 09 06 2009 2 6...
