3
Introduction
The TMC-1 is a monitor controller developed by CB Electronics. It allows remote control of the
Yamaha MMP1 Studio Monitor Management System via Ethernet connection, allowing for level
adjustments, mute on/off, and monitor source selection.
This guide explains how to connect the MMP1 to the TMC-1 and set up the system.
For more information about TMC-1 functions that can be used as to control the MMP1, see
“
TMC-1 - MMP1 Monitor remote
”
on CB Electronics
’
website.
TMC-1 - MMP1 Monitor remote
https://www.cbelectronics.co.uk/tmc1-downloads
Note:
・
When the GPI functions for TMC-1 and MMP1 are used with the Ethernet connection, the
GPI function will be prioritized.
Equipment used
The following are the main devices that are used in this guide.
・
Yamaha MMP1
・
CB Electronics TMC-1
・
A computer with MMP1 Editor and TMC-1 setup software installed
・
A network switch
(This guide uses a Yamaha SWP1 as an example, however, other types of network
switches can be used as well.)
Summary of Contents for TMC-1
Page 1: ...MMP1 to TMC 1 Setup Guide Version 1 0...
Page 14: ......
