Cayken KCY-320WEQ, Operating Instruction, Page: 4 / 16

2
SAFETY REGULATIONS
1.Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious personal injury.
2.Keep bystanders, children and visitors away while operating a power tool. Only
to be operated by qualified person who has read and understand the manual.
3.Don
´
t expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
4.Do not abuse the cord. Never use the cord to carry the tools or pull the plug fr-
om an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Rep-
lace damaged cords immediately. Damaged cords increase the risk of electric
shock.
5.Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
6.Keep bystanders, children and visitors away while operating a power tool. Dis-
tractions can cause you to lose control.
7.Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
8.Check that the blade and the blade guard is not damaged or cracked before
starting. Replace the blade or the blade guard if it is exposed to impact or is
cracked.
9.Wear personal protective equipment. Wear safety shoes or boots, protective
gloves, a hard hat, ear protection and eye protection.
10.Remain at a distance from the blade when the engine is running.
11.Never use the machine in upside down way.
12.Make sure that the mains voltage corresponds to the specification given on
the type plate.
USE THE KEY POINTS OF THE CUTTING MACHINE
1.The use of power supply
Make sure that whether the power supply is equipped with creepage prevention
device.If not,you can buy it by yourself.Please wear rubber shoes and rubber gloves
before operation for sake of safety.
2.Protect the inside of the motor from water
If water comes into the inside of the motor,it will arouse electric shock or burn the
motor.
3.Cool the cutter in the inlet valve
Because superheated saw web’s longevity will be short,pay attention to supply
water to the inlet valve in the cutting procedure.In addition,please note that do