6
5. Optical Output
This output is suitable for DAC with optical input.
6. Coaxial Output (RCA)
This output is suitable for DAC with coaxial input.
7. Coaxial Output (BNC)
This output is suitable for DAC with coaxial input.
8. AES/EBU Output (XLR)
This output is suitable for DAC with AES/EBU input.
u
Note:
To ensure system will perform satisfactory, we recommend you to use proper
digital audio cable that meets required specification when connect iDAP-6 to
digital audio equipment.
u
Important Note:
a. Please select “I²S” from “Output Selection” of “Music Setting” before you use
the I²S (HDMI) output of IDAP-6
b. Please select “S/P” from “Output Selection” of “Music Setting” before you use
the optical, coaxial (RCA and BNC) and AES/EBU output of IDAP-6.
c. USB and S/PDIF output are mutually exclusive, connecting USB Audio device
to iDAP-6 will disable S/PDIF and I²S output automatically.
9. Power input connector
Connect to AC Power supply.
Please make sure the AC voltage of your local power supply match the voltage
information printed on the back panel before you power up the player.
10. FUSE.
If in case you need to change the fuse, please use replacement fuse with same
specification as the original. (The player is equipped with 2 spare fuse).
11. Main Power Supply
Switch the main power supply to "On" position will turn on the Player.
u
Tips:
If you are not going to use the player for a while, we recommend you to turn off the
main power supply.
