Page | 13
MANUAL (UK)
Adjust ->
With the adjust function you can set the feed curve per day.
In these windows you can set the curve for each point. The change points of the curve can be by day,
but can also change after a few days. The number of grams in the curve is calculated from point to
point. In the example, 2800 grams are fed in day 1. The next point on day 5 is 1500 grams. The curve
then decreases until day 5 to the entered number of grams. Then the system takes the next point
and works towards the next point again. In total you can indicate one starting point (day 0), 6 middle
points and one end point. The days after the last entered point keep the same value as the number
of grams at the last entered point.
PLEASE NOTE: If there is still a value at 0 grams under a completed day (1-180),
the curve will decrease to 0 grams !
Example:
Start
1th
2nd
3th
End
0
1
5
7
10
Day
2500
2800
1500
2800
3200
grams
0
500
1000
1500
2000
2500
3000
3500
0
1
5
7
10
Feed curve (example)
