7.
NORMAL MODE:
In normal mode the LED will flash every 48 seconds to show correct operation.
20
When the test signal is sent out, the alarms will respond in two ways:
1. A single beep every 8 seconds indicates that the alarms are connected and functioning.
2. Three short beeps every 8 seconds indicates a smoke sensor fault. The alarm
should be cleaned by running the vacuum (on a low setting) around the smoke alarm
chamber and tested again.
If required this indication can be stopped early on each alarm by a short press of
the test button.
TIP: It is safe to cover the sound output hole with your finger during the testing to
minimize the sound level emitted.
If the problem continues, please visit www.cavius.com for any trouble shooting.
19
