8–iWARP Configuration
Configuring iWARP on Windows
171
BC0154501-00 P
If iWARP traffic is running, counters appear as shown in the
example.
Figure 8-4. Perfmon: Verifying iWARP Traffic
4.
To verify the SMB connection:
a.
At a command prompt, issue the
net use
command as follows:
C:\Users\Administrator>
net use
New connections will be remembered.
Status Local
Remote
Network
---------------------------------------------------------
OK
F:
\\192.168.10.10\Share1
Microsoft Windows Network
The command completed successfully.
b.
Issue the
netstat -xan
command as follows, where
Share1
is
mapped as an SMB share:
C:\Users\Administrator>
netstat -xan
Active NetworkDirect Connections, Listeners, ShareEndpoints
Mode
IfIndex Type
Local Address
Foreign Address
PID
Kernel 56
Connection 192.168.11.20:16159 192.168.11.10:445
0
Kernel 56
Connection 192.168.11.20:15903 192.168.11.10:445
0
Kernel 56
Connection 192.168.11.20:16159 192.168.11.10:445
0
NOTE
.
For more information on how to view Cavium RDMA counters in
Windows, see
“Viewing RDMA Counters” on page 138
.
