EN-9
Troubleshooting
The appliance makes lots
of noise?
l
Please adjust the front foot, to keep the appliance
level.
l
Please keep the appliance a bit space from walls.
Liquid flowing sound
inside the cabinet?
l
It is normal because of the refrigerant working
inside.
The appliance does not
start?
l
Make sure the appliance is connected to the power
properly.
l
Make sure switch on the power.
l
The compressor re-starts after 5 minutes for a
power cut.
Compressor runs
continuously?
l
If no cold is being produced, call the retailer’s after-
sale service.
Door does not seal
tightly?
l
After long time use, the door seal might get stiff &
distorted partially.
2. Heat the door seal with hot-wind blower or hot
towel.
3. The door seal gets softened and close the door.
The appliance does not
cool sufficiently?
l
Please adjust temperature setting.
l
Keep the appliance away from sunlight or heat.
l
Please do not open the door frequently.
Unpleasant smells inside
cabinet?
l
A little bit plastic smell for newly-buy appliance is
normal and will disappear after a short time.
l
Clean the compartment and ventilate it for a few
hours.
Condensate on the glass
door?
l
Please do not open the door frequently or for a
long time.
l
Please do not set the temperature too low.
l
High ambient temperature and humidity would
cause condensate.
The light is not working?
l
Check the power supply first.
l
Call the retailer’s after-sale service if the light is
broken.
