8
EN-
Down
Press the key once, LED Display in regular flash showing current set
temperature. Continue pressing to adjust set temperature, one press reduce 1
℃
.
Regular flash quit after 5 seconds detecting no press and new set temperature
save. LED display return to show actual temperature inside.
Child Lock
(
Combination key
)
1. Lock
:
Press both keys at the same time for 3 seconds to lock.
2. Unlock
:
Press both keys at the same time for 3 seconds to unlock.
Fahrenheit/Celsius display interchange
Switch temperature display between Fahrenheit and Celsius by pressing and holding
the key for 2 seconds.
Attention
1. The ex-factory temperature of this product is 12
℃
, and the corresponding
temperature range need to be set according to the actual wine.
2. For both upper and lower zone, the cooling temperature could be set from 5
℃
-22
℃
. The temperature of lower zone cannot be set lower than the upper zone.
Moreover, when the temperature setting in the upper zone is higher than that in
the lower zone, the set temperature in the lower zone will also follow the same set
temperature as the upper zone.
In addition, when the same temperature is set in the upper and lower zones, the
actual temperature in the lower zone is 1 to 2 degrees higher than the actual
temperature in the upper zone.
3. Alarm sound: when the system malfunction occur and alarm sound, press any key
on the control panel to cancel the alarm sound.
4. Error code:
When the temperature sensor of upper zone failure occur, error code displays: E1
for open circuit; E2 for short circuit.
When the temperature sensor of lower zone failure occur, error code displays: E5
for open circuit; E6 for short circuit.