Troubleshooting
The appliance makes lots
of noise?
Please adjust the front foot, keep the appliance
level.
Please keep the appliance a bit space from walls.
Liquid flowing sound
inside the cabinet?
It is normal because of the refrigerant working
inside.
The appliance does not
start?
Make sure the appliance is connected to the power
properly.
Make sure switch on the power.
The compressor re-starts after 5 minutes for a
power cut.
Compressor runs
continuously?
If no cold is being produced, call the after-sale
service.
Door does not seal
tightly?
After long time use, the door seal might get stiff &
distorted partially.
2. Heat t he door se al with hot -wind bower or hot
towel.
3. The door seal get softened and close the door.
The appliance does not
cool sufficiently?
Please adjust temperature setting.
Keep the appliance away from sunlight or heat.
Please do not open the door frequently.
Unpleasant smells inside
cabinet?
A little bit plastic smell f or newly-buy appliance is
normal and will disappear after a short time.
Clean the compartment and ventilate it for a few
hours
Condensate on the glass
door?
Please do not open the door frequently or f or a
long time.
Please do not set the temperature too low.
High ambient temperature and humidity would
cause condensate.
The light is not working?
Check the power supply first.
Call the re
tailer’s after-sale service if the light is
broken.
EN-10
