8
How to set impedance adjustment switch
ⷈ
You should adjust the impedance value of the equipment connected and can hear the best sound quality.
ⷈ
The switches on the side are composed of two groups from #1 to #4.
The switches are divided into left and right channels, and the two groups must be adjusted in the same location.
If you adjusted each other differently, the volume and quality of both the left and right can be printed differently.
Correct Example
Incorrect Example
1
2
3
4
ON
1
2
3
4
ON
1
2
3
4
ON
1
2
3
4
ON
If you do not know the input impedance of the connected device, first turn all the switches
on the device to the OFF state and then try to listen. If there are lots of treble and lack of bass,
turn switch 1 only ON and then listen again.
But if it is the same though, increase to #2, #3 and #4 switches in the same way.
If the sounds stuffy or too much bass,
> Since the number of switches in combination (the number of the ON position) is too large,
it is recommended to lower the number of combinations.
If there are lots of treble and lack of bass,
> Since the number of switches in combination (the number of the ON position) is too small,
it is recommended to increase the number of combinations.
