Basic Operation
1. Turn on STB
Make the connection as given in connection diagram. Turn on the STB by switching on the adaptor
mains power supply.
2. Standby
Press [Standby] key for the STB to enter the Standby state.
In Standby state, press [Standby] key again to recall the last channel.
User can also disconnect the device’s main power to end the Standby state.
3. Channel Up/Channel Down
In full screen, press [CH+/CH-] to change channel.
4. Volume Up/Volume Down -
In full screen, press [VOL+/VOL-] to adjust volume.
5. Number
In full screen, use number key and press [OK] on the Remote Control Unit to change channel.
6. Mute
Press [MUTE] key to mute the sound and the screen will show up mute on the screen.
Press [MUTE] key again to restore sound.
7. Pause
In play mode, press [PAUSE] key, the picture will be paused.
Press [PAUSE] key again, the screen’s picture will skip over to the current playing picture, and the
sound of the channel will play correspondingly.
8. Audio
In full screen, press [AUDIO] key to open the “Audio Setting” window on the screen.
9. TV/Radio
In TV mode, pressing [TV/RADIO] key can switch to Radio mode. In Radio mode, press
[TV/RADIO] key to switch to TV mode.
10. Channel List
Press the [OK] key while the program is playing in full screen to open channel list.
11. Recall
In full screen press [RECALL] key to switch to the last viewed channel. The program name and
channel information are displayed at the bottom of the screen.
12. FAV
This key can call up the Fav Channel Group List when there are no other menus in full screen.
13.
Menu
Press [MENU] key to open the menu, exit the current menu to last menu or close the window.
