Safety Precautions
WARNING:
Do not use this STB where contact with or immersion in water is a possibility. Do not use
near flower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.
Do not put the candle or lamp stand on the cabinet; otherwise, there is a danger of fire.
The unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the unit. If you are not sure of the type of power supply (for
example, 120 or 230 V) to your home, consult your local dealer or local power company.
This product contains sensitive electronic components, do not open cabinet and touch inside.
Consult your local dealer for technical service if opening of the STB is required.
Unit Cleaning:
After the unit power is turned off, you can clean the cabinet, panel and remote control
with a soft cloth lightly moistened with a mild detergent solution.
Attachments:
Never add any attachments and/or equipment without the manufacturer’s consent;
such additions may result in the risk of fire, electric shock, or other personal injury.
Location:
Slots and openings in the cabinet are provided for ventilation to protect the STB from
overheating. Do not block these openings or allow them to be blocked by placing the STB on a bed,
sofa, or other similar surface, nor should it be placed over a radiator or heat register.
Power-Cord Protection:
Place the power-supply cord out of the way, where it will not be walked
upon. Please pay special attention to cords at plugs, convenience receptacles, and the point where
they exit from the unit.
Object and Liquid Entry:
Never put objects of any kind into this STB through openings, as it may
touch dangerous points or short-circuit parts that could result in electric shock. Never spill any liquid
in the STB.
Parts Replacement:
When the STB needs to be repaired the user should make sure that this STB is
serviced by the manufacturer or authorized service centre. Use only the manufacturer-specified spares
to avoid electric shock or any other hazards.
Safety Check:
After all the maintenance and repairs are done, user should request the service
technician to conduct the overall safety check to ensure that the machine is in the proper condition.
