background image

Model 2809 

CATV

Linx

® 

LDS CATV Receiver

Revision 2.0

ii

About this Manual

This manual explains how to configure and install the Model 2809 LDS CATV 
receiver. It is intended for engineers and technicians who will install the 2809R 
receivers with companion transmitter, Model 2806 (see IOM2806). While this 
guide provides basic information on how to configure and install the units, it 
assumes that you as the user are familiar with:

• the installation and manipulation of electronic and fiber optic equipment
• the installation and manipulation of CATV video/audio equipment

This manual is divided into the following sections:

• Section 1, page 1: Describes the LDS CATV receiver, lists technical specifica-

tions, performance graphs, system applications, and ordering information.

• Section 2, page 7: Describes the installation of the LDS CATV receiver, connec-

tions, and safety precautions.

• Section 3, page 11: Describes the operation of the LDS CATV link, trouble-

shooting, and user maintenance.

A quick-reference index completes the user manual. 

Related Documentation

IOM2806: User Manual for Model 2806 LDS Transmitter

AN123: North American Television Frequencies

AN128: Care and Feeding of Analog CATV Fiber Optic Links

AN141: System Solutions for CATV HFC Networks

Fiber Optic Reference Guide, 3rd Edition

. by David R. Goff (Focal Press 2002): 

General theory and operation of fiber optic units.

Web Site: Our web site, http://www.forceinc.com may be used to download 
the latest versions of this manual.

Preface

Summary of Contents for 2809























Reviews: