Cattron MKU OCU, User Manual

Page: 24 / 41

24
MKU OCU
User Manual
9. Maintenance Instructions
Unless customer technicians have received formal maintenance training from Cattron, our maintenance
philosophy is that inoperative OCUs and MCUs be returned as complete units to our workshops for repair. This is
primarily for safety reasons as it is unlikely that two control systems will be the same.
Note: When returning an OCU for repair, the original TransKey supplied with the unit should be removed and
retained for use with your spare unit.
9.1 Preventative Maintenance
Preventive maintenance is limited to the following:
Daily Visual Inspection:
Before use, visually inspect the OCU and MCU for cleanliness, physical damage and security of external parts
(screws, switches, rubber grips, etc.). Cattron emphasizes that regular visual inspections not only mean quickly
locating a source of potential problems, but also may prevent serious problems from developing later.
9.2 Cleaning the OCU
The OCU should be cleaned with a moist cloth and then wiped dry with a clean paper towel. DO NOT IMMERSE
THE OCU IN WATER.
9.3 Functional Check
A functional check is accomplished by operating the OCU in accordance with the operating procedures outlined in
Section 9.1 of this manual. Ensure all system control functions are fully operational.