LRC-M1 and LRC-L1 Remote Control
User Manual
12
9M02-7634-A001-EN
Version 3
1 Stop Switch
2 Push Button
3 Key Switch: ON/OFF
4 Push Button Horn
5 Joystick
6 Status LED
7 Graphic LCD (optional)
Figure 5: LRC-M1 with LCD
4.2
Display Option
The OCU can be optionally equipped with a graphic display. This can be used to indicate certain OCU parameters
such as the operating frequency, internal error messages and battery status, and/or to display feedback data that
transmits back from the corresponding MCU (in this case, it functions as a transceiver, receiving and transmitting
data). For further information regarding the feedback option, please refer to the system-specific information
provided with your system.
4.3
Before Turning On
1. Verify that the TransKey (black) is placed in the TransKey hollow inside the battery compartment.
2. Insert a fully charged battery.
Note:
Batteries are shipped uncharged.
4.4
Turning the OCU On (Standard)
1. Release the STOP switch and ensure all motion controls including joysticks are at neutral.
2. Turn the key switch to the ON position 'I'.
3. The Status LED briefly lights red, then flashes green.
4. The OCU is turned on.
Note:
After the OCU is turned on, the safety relays in the MCU energize and the MCU is able to respond to
commands initiated by the OCU.
