Cattron DYNAGEN ES52, User Manual

Page: 2 / 27

DynaGen
TM
ES52 - EN
User Manual
2
9M02-9253-A001-EN
Revision A
Revision History
VERSION DATE NOTES
2.10 08/2012 Improved crank disconnect procedure. Added VTS2 connection to technical
notes. Made other minor changes.
3.0 12/2015 Updated Troubleshooting note for flashing Over-speed. Updated technical
notes for 10A diode to apply only to EI, FE and LT (cooldown). Removed
reference to hour meter; not available on ES52. Updated wiring guidelines
section. Changed max temp in Specifications. Clarified that Aux Input is also
failure, as for Oil and Temp. Cleaned up Troubleshooting section on loss of
speed during cranking. Added new DynaGen logo. Changed wiring diagram to
clarify that Auto/Test switch is actually a switch. Clarified section on Test/RSC.
Reorganized remote start contacts and added section on pins 12 to 19 in I/O
table. Added 20A fuse blown to unit inoperable section in Troubleshooting.
4.0 08/2017
Added Zero Speed Restart
TM
feature to manual. Added default settings. Added
title page picture. Relabeled “Oil Switch Verification”. Added section to
Troubleshooting about unit not cranking. Added flashing Over-crank to LED
tables.
5.0 04/2019 Added remote start contact relay to wiring diagram. Improved Oil Verification
section. Clarified that 69 Hz/1080 Hz refers to Over-speed, not crank
disconnect.
A 09/2021 Document rebranded, and contact information updated.
B 09/2022 Updated branding information.
Any information furnished by Cattron™ and its agents is believed to be accurate and reliable. All specifications are subject to change without notice.
Responsibility for the use and application of Cattron products rests with the end user since Cattron and its agents cannot be aware of all potential uses.
Cattron makes no warranties as to non-infringement nor as to the fitness, merchantability, or sustainability of any Cattron products for any specific
or general uses. Cattron Holdings, Inc., or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All
Cattron products are sold pursuant to the Terms and Conditions of Sale, a copy of which will be furnished upon request. When used as a tradename herein,
Cattron means Cattron Holdings, Inc. or one or more subsidiaries of Cattron Holdings, Inc. Cattron™, corresponding logos, and other marks are
trademarks or registered trademarks of Cattron Holdings, Inc. Other marks may be the property of third parties. Nothing herein provides a license under
any Cattron or any third party intellectual property right.