CANplus CP750-E
Control Panel Operation Manual
*Patent Pending
33
9M02-1000-A501-EN
Revision B
9
Configuration
The CP750-E has been preloaded with factory default configurations, or optionally a custom OEM-specific
configuration, to ensure easy start-up and commissioning. To support the diversity of applications, the control
panel is easily configured on demand. Accessing configurable settings can be accomplished in three ways:
• Display Menu
• CANplus Customizer Software Suite and CANplus Config Kit
• CANplus Customizer Software Suite and a USB drive
9.1 Display Menu
Most commonly accessible parameters can be changed onsite or in a facility by navigating the display using the
soft keys to find the appropriate menu page and data field. The available menu items are dependent upon the
current access level (see the
section for available menu items). Easy to follow menu navigation
diagrams are located throughout the user manual and accompany each section which describes a configurable
operation or setting.
9.2 CANplus Customizer Software Suite and CANplus Config Kit
In situations where multiple units must be reconfigured, or in the case of a single unit which requires complete
reconfiguration, using the CANplus Customizer Software Suite, which is proprietary configuration software, is
highly recommended. The software suite is meticulously maintained and regularly updated. These free updates
include software enhancements and new functionality, and they ensure compatibility with evolving technologies.
Please see the Resources section at
The CANplus Config Kit (Part Number 010-6750-01) includes the following:
• An adapter harness that connects to the panel’s engine interface connector
• An AC power supply
• A USB to CAN bus hardware adapter
With this kit, a panel’s configuration can be read from the panel or written to the panel via CAN bus. During read
or write operations, the panel must be the only CAN bus device. Using the included adapter harness ensures
proper operation during configuration read or writes.
9.3 CANplus Customizer Software Suite and a USB Drive
The CP750-E introduces the ability to import and export configurations using a USB drive, avoiding the need to
purchase and have onsite a CANplus Config Kit as well as the need to disconnect the panel from the engine.
The panel’s USB port is located on the front of the panel under the key switch. It is recommended that the dirt
and dust rubber plug be inserted into the USB port when this port is not in use. Additionally, the port can be used
to charge a phone if desired.
Install the USB drive in the panel’s USB port. The current configuration can be exported by going to the
System
→
Export Config.
menu. To import a new configuration, the menu access level must be at the Tech or Admin
level (see the
section). A new configuration is imported by going to the
System
→
Import
Config.
menu. New configuration changes take effect immediately. Therefore, the engine should not be running
