CANplus CP750-E
Control Panel Operation Manual
*Patent Pending
20
9M02-1000-A501-EN
Revision B
3.7.3 Quick Access Menu
The Quick Access Menu can be opened by pressing the menu control button
. This menu contains
commonly accessed menu items. All access levels open this menu, and it is not affected by the Menu PIN
Required setting. The following is the Quick Access Menu tree:
•
Start-Stop with
•
Operation
•
Maintain Function
•
Language
•
Distance units
•
Pressure units
•
Volume units
•
Temperature units
•
High Set Point
•
Low Set Point
•
Target Point
•
Autostart Dashboard
4
Engine Setup
Setting up the panel for a particular engine can be done through the menus. However, some engines require
changes to multiple parameters. For this reason, using the CANplus Customizer is highly recommended for
creating configurations for a particular engine as it will automatically create configurations with the necessary
parameter changes, as well as populate commonly used gauges for the particular engine.
All of the following panel menu actions described in this section require Admin-level privileges.
4.1 Electronically Governed Engines
To configure the panel to a particular engine, first go to the
System
→
Engine Type
menu and select the
appropriate engine.
Some engines require additional configurations. After selecting the engine type, check to see if the particular
engine selected needs additional configurations by navigating to the
System
→
Engine Specific Settings
menu. If the engine selected is listed, enter that sub-menu to configure the additional parameters. If the selected
engine is not in the list, no further configurations are required.
Finally, set the Minimum, Idle and Maximum RPMs in the Throttling Menu.
4.2 Mechanically Governed Engines
To configure the panel for a mechanical engine, first go to the
System
→
Engine Type
menu and select the
mechanical engine. Next, navigate to the
System
→
Engine Specific Settings
→
Mechanical Engines
menu.
The following steps should be performed in order:
