Cattani ASPI-JET 6 y, Operator'S Handbook Manual

Page: 8 / 24

8
cod: ed. 10-2021
CERTIFICATION OF MEDICAL EQUIPMENT
ACCORDING TO DIRECTIVE 93/42/CEE
Further to the accreditation for applying CE marking
to those of our appliances that are classified as
medical equipment:
ASPI-JET Models 6-7-8-9 γ
servicing authorized engineers shall use only
original CATTANI spare parts when repairing the
above appliances.
This type of intervention (replacement of parts
which have lost their mechanical/electric features
in the course of time) is considered as a corrective
maintenance intervention on a breakdown with the
purpose to bring the equipment back to its initial
safety condition, therefore according to the Directive
93/42 the equipment must be tested again after the
intervention.
The tests to be performed are described in the
standard IEC EN 62353 “Electromedical equipment”
- Periodic inspections and tests to be performed
after interventions on electromedical equipment –
and it is also advisable to perform them as described
in the CEI EN 60601-1 (CEI 62-5) standards.
Moreover, with reference to the components listed
here below, whose lot and supplier must be easily
traced, engineers shall refer to the following table:
While submitting an order for the above components
to the sales department of CATTANI S.p.A , they shall
also indicate SERIAL NUMBER of the concerned
appliance, committing to install the components to
that appliance and not to others.
CERTIFICATION OF MEDICAL EQUIPMENT ACCORDING TO DIRECTIVE 93/42/CEE
Components Code
MOTOR UNI-JET 75
020354
020348
020349
020353
110 V 60 Hz
230 V 50 Hz
240 V 50 Hz
220 V 60 Hz
PRINTED BOARD
180921
180923
180930
180931
180940
180941
180943
AC 15 CIRCUIT -230 V
AC 15 CIRCUIT -110 V
Cpump -220 V
Cpump -240 V
AC 20 CIRCUIT -220 V
AC 20 CIRCUIT -240 V
AC 20 CIRCUIT -110 V
DOOR MICRO SWITCH 183102
ASS. CABLE W/MICRO 180810