20
OPERATING YOUR SB 810 BLENDER
NOTE
We recommend setting the lowest
speed and gradually increasing it as
needed during processing. The values
in the table are only recommended
and may vary from case to case.
VACUUM ATTACHMENT
If you use a blender with a vacuum
attachment, always make sure that the
protective rubber cap is inserted in the
vacuum attachment before using it. Never
use the vacuum attachment without
a protective rubber cap.
The protective vacuum cap is two-sided.
Insert the cap into the vacuum attachment
depending on whether you are vacuuming
air from a special vacuum container or
a special vacuum bag.
If you are going to extract air from the
container, the wider end of the cap must face
outwards.
If you are going to extract air from the bag,
the narrower end of the cover must point
outwards.
Wider end of the cap suitable for extracting air
from the container
The narrower end of the cap is suitable for
extracting air from the bag
Set speed "1" and press hold down the
switch. You can use the vacuum attachment
for a maximum of 1 minute.
WARNING!
NEVER
USE A SPEED
HIGHER THAN "1".
OTHERWISE THERE IS
A RISK OF SERIOUS
DAMAGE TO THE
APPLIANCE.
