Catler KM 8012, Instruction Manual

Page: 22 / 27

19
OPERATING YOUR STAND MIXER KM 8012
5. Tighten the joining screw. Make sure that
the attachment is not loose and does not
move.
6. Now insert the power plug into a power
socket.
7. Press the button. A sound is made and
“0” speed and “00:00” time will be shown.
8. Put a bowl under the attachment outlet.
9. Turn the speed control dial to set the
required speed. We recommend that you
set the initial speed to 5 and adjust as
needed.
10. Place the raw materials that you wish to
process into in fi lling funnel. Using the
supplied plunger, slowly push the raw
materials through the fi lling funnel.
WARNING!
To push raw
materials through
the filling funnel,
always use the
supplied plunger.
Never use your
fingers or other
items.
11. When all the raw materials have been
processed, set the speed to “0”, wait until
the rotating parts come to a complete
stop and press the
button briefl y to
turn the appliance off . Then, unplug the
power cord from the mains socket.
12. Put the bowl with the processed food
aside.
13. Hold the cutting and grating attachment
with one hand and release the locking
screw with the other. Carefully remove
the attachment from the tilt-back head
and put it on the countertop or in the
sink. Insert the front cover in the hole on
the tilt-back head and tighten the joining
screw.
14. Clean the attachment and the stand
mixer according to the instructions in the
“Care and Cleaning” chapter.