19
CARE AND CLEANING
CLEANING THE JUICE JUG AND THE PULP
CONTAINER
Wash the juice jug and the pulp container in
warm water with a small amount of washing-
up liquid. Rinse and wipe dry.
CLEANING THE JUICE CHAMBER
2
1
3
4
1. Open the anti-drip tap and carefully
remove it from the spout.
2. Remove the silicone sealing in the
chamber centre.
3. Release the silicone sealing at the
chamber bottom that prevent the pulp
from leaking.
4. Wash chamber, anti-drip tap and central
silicone sealing under running warm
water.
5. Wash in warm water with a small amount
of washing-up liquid as needed. Rinse
and wipe dry.
6. You can remove the raw material residues
with the opposite end of the cleaning
brush.
NOTE
Before assembling the juicer, make
sure that the silicone sealing at the
chamber bottom is correctly inserted
in the chamber opening and the
central silicone sealing and the anti-
drip tap are correctly inserted on the
juice spout. Incorrect tap fi xing results
in the juice dripping off the spout.
CLEANING THE MOTOR BASE
Wipe the motor base with a soft sponge
slightly moistened in warm water.
NOTE
Before assembling the juicer, make
sure that all parts are dried properly.
STORAGE
Before storing, make sure that all parts are
clean and dry.
Store your blender in a horizontal position
in a dry and well-ventilated place. Do not
place any objects on your blender. Always
make sure that the knife unit is stored out of
children’s reach.
