7
ASSEMBLING YOUR JE 4011 JUICE EXTRACTOR
Step 1
Place the motor base on a fl at, dry surface
such as a bench top. Ensure that the motor
base is switched ‘Off ’ at the control panel,
then switch the appliance off at the power
outlet and unplug the cord.
Step 2
Place the fi lter bowl surround on top of the
motor base.
Step 3
Align the arrows at the base of the juice disc
with the arrows on the motor drive coupling
and push down until it clicks into place.
Ensure the juice disc is fi tted securely inside
the fi lter bowl surround and onto the motor
base.
Step 4
Place the juicer cover over the fi lter bowl
surround, positioning the feed chute over
the juice disc and lower into position.
BEFORE FIRST USE
Before using your JE 4011 Juice Extractor for the fi rst time, remove any packaging material
and promotional stickers and labels. Ensure the appliance is switched off at the power outlet
and the power cord is unplugged.
Wash the fi lter bowl surround, juice disc, juicer cover, Puree disc, Puree insert, food pusher,
pulp container and juice jug and lid in warm, soapy water with a soft cloth. Rinse and dry
thoroughly. The motor base can be wiped with a damp cloth. Dry thoroughly.
FOR USE WITH JUICE EXTRACTOR
ASSEMBLING YOUR JE 4011 JUICE EXTRACTOR
