14
ASSEMBLING YOUR FG 403 FOOD+
ASSEMBLING YOUR FG 403 FOOD+
ASSEMBLING THE JUICING ATTACHMENT
1. Place the motor unit on a dry, level and
firm surface.
2. Make sure that the lock is turned so that
the arrow points to the open lock symbol.
3. Insert the juicing attachment into the
motor unit so that the protrusions on
the attachment fit into the cut-outs in
the fixing thread. Then turn the lock
clockwise until the arrow points to
the closed lock symbol and you feel
resistance.
4. Insert the juicing worm shaft into the
juicing attachment. Rotate the worm
shaft as necessary to engage the bearing
in the motor unit.
5. Insert the fine strainer into the juicing
attachment so that the protrusions on
the strainer fit into the cut-outs in the
attachment. Push the strainer slightly to
make sure it is inserted correctly and not
loose.
6. Fit the front cover onto the juicing
attachment so that the protrusions
on the cover fit into the cut-outs in
the attachment. Then turn the cover
counterclockwise until you reach the
closed lock symbol and feel resistance.
7. Fit the hopper onto the filling funnel and
insert the plunger into the funnel.
8. Place the pulp container under the front
cover and the juice jug under the juice
outlet.
9. The appliance is now ready for use.
10. To disassemble, perform the procedure in
reverse order.
ASSEMBLING THE FOOD GRINDER
1. Place the motor unit on a dry, level and
firm surface.
2. Make sure that the lock is turned so that
the arrow points to the open lock symbol.
3. Insert the food grinder into the motor
unit so that the protrusions on the
grinder fit into the cut-outs in the fixing
thread. Then turn the lock clockwise
until the arrow points to the closed lock
symbol and you feel resistance.
4. Insert the worm shaft of the grinder into
the grinding chamber. Rotate the worm
shaft as necessary to engage the bearing
in the motor unit.
5. Fit the grinding blade onto the worm
shaft. It is important that the blade is
pointing out of the grinding chamber.
WARNING!
WHEN
ATTACHING THE
GRINDING BLADE,
BE VERY CAREFUL
NOT TO GET
INJURED WITH ITS
EDGE.
6. Attach one of the grinding discs on the
grinding blade. Select a grinding disc
depending on the preferred grinding
roughness and intended meat use. Make
sure that the protrusion in the grinding
chamber is engaged with the notch in
the grinding disc.
7. Now attach the screw cap and screw it
properly by turning clockwise. Make sure
the cap is tightened securely. However,
do not tighten with excessive force to
avoid stripping the thread.
