20
CARE & CLEANING
CLEANING THE STEAM WAND
Run steam to clean milk from
wand after texturing.
Wipe steam wand after each use.
Clean hole with pin.
Remove tip.
Soak tip overnight then re-attach.
CLEANING FILTER BASKETS
Should the fi ne holes in the fi lters become
blocked follow the steps below:
1. Place the fi lter into the portafi lter. Run
water through the machine with the
fi lter and portafi lter, without any ground
coff ee, in place.
2. A pin can be used to clear the fi lter
basket holes.
3. For a thorough clean of the fi lters,
dissolve a cleaning tablet in hot water
and soak fi lters overnight.
CLEANING THE OUTER HOUSING / CUP
WARMING PLATE
The outer housing and cup warming plate
can be cleaned with a soft, damp cloth. Then
polish with a soft, dry cloth.
Do not use abrasive cleansers, pads or cloths
which can scratch the surface.
CLEANING THE DRIP TRAY
The drip tray should be removed, emptied
and cleaned at regular intervals.
Wash the drip tray with warm soapy water,
using a non-abrasive washing liquid, rinse
and dry thoroughly. The drip tray base and
cover are dishwasher safe.
CLEANING THE STORAGE TRAY
The storage tray can be removed after the
drip tray is removed then cleaned with a soft,
damp cloth (do not use abrasive cleansers,
pads or cloths which can scratch the surface).
STORING YOUR MACHINE
Before storing, press the POWER button to
off , turn the Control Dial to ‘I’ and unplug.
Insert all accessories into position or into the
storage tray.
Store upright. Do not place anything on top.
WARNING
DO NOT IMMERSE POWER
CORD, POWER PLUG OR
APPLIANCE IN WATER OR
ANY OTHER LIQUID. THE
WATER TANK SHOULD
NEVER BE REMOVED OR
COMPLETELY EMPTIED
DURING DECALCIFYING.
