005-20170322-122
March 22, 2017
Page 5
5 (RX - )
1 (TX - )
Converter to the NVR is dependent on
the converter switch settings.
Contact the 3
rd
Party company for
more information.
6 (TX - )
4 (RX - )
1, 8 (GND)
5 (GND)
d.
Connecting Via USB to Serial Converter
Motherboards are increasingly being manufactured without on-board serial ports. For new Windows PCs
without on-board serial ports, it is necessary to use USB - to serial converters as described below.
Note
: The USB to serial converter must have a DB9 connector.
Install the USB to Serial Port Software
ES-U-1001-R100 /US232R-100 USB to RS121 adapter
1. Plug the converter into a USB port at the back of the motherboard.
2. Insert the driver CD into the DVD writer
3. Go to the device manager (
Start>> Control Panel >> Hardware and Sound>>Device Manager)
4. Right click on the unknown device and go to
update driver software.
5. Browse
My Computer
for software driver
6. Browse to the D drive and ensure that the
include subfolders option
is ticked.
7. Click
Next
and the unit will install the device from the CD.
> Windows will initialize the COM port and the device will be ready for use.
8. After installing the drivers, check the
>> Control Panel >> Hardware and Sound>>Device Manager
to
identify the port number, making sure that the port is assigned to COM port 3 (COM3). If not, follow the
following instructions on how to change the COM port...
•
Set the COM port
Note
: The KBD-3000 setup can see up to a maximum of 10 COM ports. The COM port need only be changed/set
if Windows picks up the COM port on a higher number than 10.
Set the COM Port
The COM port that is configured here must match the one configured in CathexisVision when enabling the
keyboard.
