SPECIFICATIONS
Light source
High-intensity LED x 2
Cartridge battery
Li-ion 3.6v 6800 mAH : BA-6.8TF
Charge
Micro USB plug
Operating time
Hi
: Approx. 2 hours
Middle
: Approx. 5 hours
Low
: Approx. 15 hours
HyperConstant : Approx. 12 hours
Flashing
: Approx. 150 hours
* Average runtime at 20˚C.
Standard charging time
Approx. 5.5 – 15 hours
Temperature range
Charging : 41˚F – 104˚F (5˚C – 40˚C)
Operating : 14˚F – 104˚F (-10˚C – 40˚C)
Recharge/discharge number
of times
About 300 times
(until the rated capacity drops to 70%)
Dimensions/weight
4-45/64" x 2-13/64" x 1-55/64" (119.3 x 56 x 47.3 mm) /
9.04 oz (256.3 g) (Including the cartridge battery)
* The specifi cations and design are subject to change without notice.
LIMITED WARRANTY
2-year Warranty : Light unit only
(Deterioration of the cartridge battery is out of warranty)
CatEye products are warranted to be free of defects from materials and workman-
ship for a period of 2 years from original purchase. If the product fails to work
during normal use, CatEye will repair or replace the defect at no charge. Service
must be performed by CatEye or an authorized retailer. To return the product, pack
it carefully and enclose the warranty certifi cate (proof of purchase) with instruc-
tion for repair. Please write or type your name and address clearly on the warranty
certifi cate. Insurance, handling and transportation charges to CatEye shall be
borne by person desiring service. For UK and REPUBLIC OF IRELAND consumers,
please return to the place of purchase. This does not affect your statutory rights.
Please register your CatEye product on the website.
http://www.cateye.com/en/support/regist/
SPARE/OPTIONAL PARTS
CO.,LTD.
2-8-25, Kuwazu, Higashi Sumiyoshi-ku,
Osaka 546-0041 Japan
Attn: CATEYE Customer Service Section
Phone : (06)6719-6863
Fax
: (06)6719-6033
E-mail : [email protected]
URL : http://www.cateye.com
[For US Customers]
CATEYE AMERICA, INC.
2825 Wilderness Place Suite 1200,
Boulder CO 80301-5494 USA
Phone : 303.443.4595
Toll Free : 800.5.CATEYE
Fax
: 303.473.0006
E-mail : [email protected]
4 HOW TO REPLACE THE CARTRIDGE BATTERY
Remove the cartridge battery according to the procedure. (
1
–
2
)
To install the cartridge, reverse the procedure.
CAUTION!: Make sure the lock pin fi ts fi rmly into the cartridge battery.
If not locked fi rmly, the cartridge battery may drop off and it may
cause sudden turn off.
3 SWITCH OPERATION (SWITCHING THE LIGHTING MODE)
WARNING!!!: Do not use this light on a public road.
The ON/OFF and lighting modes are selected using a switch.
*2 When you turn the light on, it lights up in the last lighting mode you used. (Mode memory function)
* The light unit may get hot depending on the condition the light is used in but it is not a malfunction. When it gets hot, protection circuit activates and it auto-
matically lowers brightness level. One it is cooled down, the light recovers the previous brightness level.
5341831N
Helmet mount
5342440
Center fork bracket
5342730
USB cable
5343200
Cartridge battery
(Li-ion 3.6v 6800 mAH)
5338827N
FlexTight™ bracket
(MICRO USB)
(BA-6.8TF)
(H-34N)
Remaining battery capacity (Battery indicator)
When the switch lights up, there is little remaining battery power.
Switch button light
Remaining battery power
Illuminated in orange
50 - 30 %
Illuminated in red
30 - 15 %
Flashing in red
Less than 15%
1
2
Lock pin
Cartridge battery
Double-click
*2
*2
Press
and hold
Press and hold
OFF
ON
Click
Click
Hi
Hi
Middle
Low
HyperConstant
Flashing
Approx.
5 h
Approx.
15 h
Approx.
12 h
Approx.
150 h
Approx.
2 h
Switch (Indicator)
OK
NO!
