Always charge the product before use.
Attach securely in the mounting position.
USB cable
To PC or USB battery charger
When the remaining battery
power is low, the lighting
mode switch starts flashing
and the lighting mode
changes to flash. Charge the
light as soon as possible.
TL-LD710-R / TL-LD710-F
Manual
RAPID X2
Click
Lighting mode switch
Press
and hold
ON OFF
Before using the light, please read this
manual and the included separate sheet
“LITHIUM-ION / LITHIUM-ION POLYMER
BATTERIES” thoroughly, and keep them
for future reference.
ENG
Design Pat. Pending
Copyright© 2014 CATEYE Co., Ltd.
TLLD710R/F-141201
2
HOW TO CHARGE
HOW TO USE
1
HOW TO MOUNT
2
3
or
(MICRO USB)
Light unit
USB cable
Rubber band
(Large/Small)
Shade the light with the sticker if you are dazzled.
* Clear lens only (Front model)
1
2
1
2
1
2
OPTION :
2
1
3
Rubber band
Rubber band
Spacer X
Bracket
4
4
or
Clip
Automatic battery-saving function :
Shade sticker
* Clear lens only
(Front model)
PRECAUTIONS ON USE
• Check periodically to ensure that the light
unit is attached securely.
Do not use a damaged rubber band.
• Stop your bicycle to operate the switch.
• Keep the light away from children.
• This unit is not totally waterproof. Please
wipe and dry it completely after using in
rain. Otherwise, it may cause failure.
• If the light unit or parts become dirty with
mud, etc., clean with a soft cloth which is
moistened with mild soap. Never apply
paint thinner, benzine or alcohol; damage
will result.
PRECAUTIONS ON CHARGING
• We recommend using 500+mA (USB2.0)
USB battery charger.
• Charging and lighting times are approxi-
mate values, and will vary by environmen-
tal and user conditions.
HOW TO REPLACE THE BATTERY
When the operating time decreases signifi-
cantly, the battery life is close to an end.
Please contact CatEye local distributor listed
on our website www.cateye.com or CatEye
for replacing battery.
PRECAUTIONS ON DISPOSAL
When disposing of the light unit, remove the
internal rechargeable battery and dispose of
it according to local regulations.
Charging
Charging is completed
Standard
charging time
Approx.
2 h
(USB 2.0)
Switch (Indicator)
Hi
Approx.
1 h
Low
Approx.
5 h
Vibration
Approx.
8 h
Flash
Approx.
30 h
Pulse
Approx.
16 h
Rapid
Approx.
16 h
ø12 – 32 mm
