USB
1
2
Removing
Mounting
USB
USB
3
4
USB
USB
OK
NO!
USB
3
HOW TO MOUNT TO A BICYCLE
Cartridge battery
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan
Attn: CATEYE Customer Service Section
Phone : (06)6719-6863
Fax : (06)6719-6033
E-mail : [email protected]
URL : https://www.cateye.com
CO.,LTD.
Mounted below
Mounted above
1. Mounting the bracket
2. Mounting above or below the handlebar
3. Attaching/removing the light
Wrap the strap around
the handlebar.
Attach the dial.
Securely tighten the dial.
Cut
2
3
1
*3
Click
Turn the cartridge battery counterclock-
wise to remove it from the headlight.
Align the grooves and turn clockwise until the cartridge battery stops.
1
2
4
3
Mounting height : 400 – 1200 mm
* This section explains how to mount the light unit
below the handlebar.
Rubber pad
Bracket
Strap
Strap
Dial
Screw
CAUTION!:
• Be sure to tighten the dial by hand.
When you tighten it too hard with a
tool, the screw thread may be
stripped.
• Check the dial and screw (*3) on
the bracket periodically, and use
them without any loosening.
• Round off the cut edge of the
bracket strap to prevent injury.
The head unit can be mounted on either above or below the
handle by positioning the visor of the head unit to the top.
Removing
Headlight
Cartridge battery
Mounted below
Mounted above
Visor
Mounting
Removing
Mounting
CAUTION!:
• When attaching or removing the
cartridge battery, be sure to hold
the headlight to prevent it from
dropping and becoming damaged.
• Do not attach the cartridge battery
if water droplets, dust, or other
foreign matter is attached to the
unit, and do not touch the
terminals.
• Never position the visor to the
bottom of the headlight. Doing so
will dazzle oncoming traffic.
Release button
Slide
Press and hold
When mounting the light unit,
ensure that the light will not
dazzle other road users. To adjust
the angle, loosen the dial or the
screw (*3) to the point that the
bracket moves slightly, make the
adjustment, and then tighten the
screw to fix the light unit in place.
HOW TO REPLACE THE CARTRIDGE BATTERY
SPARE/OPTIONAL PARTS
LIMITED WARRANTY
USING THE E-BIKE ADAPTER
(OPTIONAL)
You can use this light with your E-Bike by combining the light module with the
optional E-Bike adaptor (sold separately).
2-year Warranty: Light unit only
(excludes battery deterioration)
CatEye products are warranted to be free of defects from materials and workman-
ship for a period of 2 years from original purchase. If the product fails to work
during normal use, CatEye will repair or replace the defect at no charge. Service
must be performed by CatEye or an authorized retailer. To return the product, pack
it carefully and enclose the warranty certificate (proof of purchase) with instruction
for repair. Please write or type your name and address clearly on the warranty
certificate. Insurance, handling and transportation charges to CatEye shall be borne
by person desiring service.
Follow the procedure below to attach or remove the cartridge battery.
CAUTION!:
Be sure to hold the headlight to make sure the cartridge battery is
securely attached or removed.
Drive unit
Light unit
E-Bike adapter
Bracket holder
To drive unit
5342730
USB cable
(MICRO USB)
5336840
Cartridge
battery
(BA-3.4DS)
5338827N
FlexTight™
bracket
(H-34N)
5342440
Center fork
bracket
(CFB-100)
5445340
GP bracket
5336920
E-Bike adapter
(Min 5.5V-Max 14.5V)
1604110
Out-front bracket 2
(OF-200)
5336860
Protective
cover
Horizontal
