Cateye GAMEBIKE FITNESS PRO GB-300R, Operation Manual

Page: 11 / 24

11
ENG
Check the distance between the console and
the chest belt: it should be within
100 cm. Keep the distance between the console and the chest belt
within 100 cm.
Is the chest belt properly worn?
Troubleshooting
The following situations are not actual malfunctions. Analyse such cases before requesting a repair.
If trouble occurs, first reset the game, if the trouble continues. Please contact the service center.
Problem Check items Countermeasures
Steering response is slow compared to the
actual steering operation. Has the steering sensitivity been adjusted
properly? See “How to adjust the controller” and increase the steer-
ing sensitivity.
Steering response is extreme compared to
actual steering operation. Is the steering sensitivity correct? See “How to adjust the controller” and decrease the steer-
ing sensitivity.
Game speed is slow compared to
pedaling speed. Did you adjust speed sensitivity? See “How to adjust the controller” and increase the speed
sensitivity.
Game speed is too fast compared to
pedaling speed. Did you adjust speed sensitivity? See “How to adjust the controller” and decrease the speed
sensitivity.
Despite the pedaling,
game speed is not fast enough. Is the speed sensor cord connected properly? No game speed occurs when the bike is pedaled.
Securely insert the controller’s blue jack.
Brake does not work.
Are you pressing brake button firmly?
To operate the brakes during the game, press the brake but-
ton.
Is the brake button cord connected properly? Insert the cord securely into the center jack on the controller.
Steering operation does not work. Is the cord of the main unit connected prop-
erly?
Insert the gray cord from the main unit securely into the jack.
Is software with non-standard button assign-
ments being used? Depending on the game, the button controls may be different from
the ordinary controls. See “Changing button functions” and change
so that the buttons function correctly.
After trying the above methods but the steering
device is not working? The main unit steering
resistance switch may be broken. Please contact the service center for details to
replace or repair.
There is a rattling sound when the pedals
are turned.
Are the pedals securely attached to the crank? Securely tighten the pedals.
Nothing is displayed.
Check for exhausted batteries in the console.
Are the batteries mounted properly? Replace with new LR-20 (D) batteries.
Mount the batteries in the proper orientation. (Check the orientation of the plus and minus
poles.)
Buttons do not respond.
Check for illumination of the mark. Replace with new LR-20 (D) batteries.
Mount the batteries in the proper orientation. Are the batteries mounted properly?
(Check the orientation of the plus and minus
poles.)
Despite pedaling, time, speed, distance and
calorie consumption are not displayed.
Despite load level increase, pedaling load
does not change.
Insert the cable connector firmly as far as it will go. Is the cable connector that extends from the
steering post firmly inserted to the console?
Is the speed sensor cord connected properly? No game speed occurs when the bike is pedaled.
Securely insert the controller’s blue jack.
Check for illumination of the mark. Replace with new LR-20 (D) batteries.
Heart rate is not displayed.
Wear the chest belt properly.
Check for illumination of the mark. Replace with new LR-20 (D) batteries.
Check for exhaustion of the battery of the
chest belt. Replace with new batteries.
Abnormally low heart rate is displayed.
Check for illumination of the mark. Replace with new LR-20 (D) batteries.
Check for exhaustion of the battery of the
chest belt. Replace with new batteries.
Abnormally high heart rate is displayed. Are there any devices nearby that emit elec-
tromagnetic waves?
Move the probable cause(s) away from this machine.