Cata Profesional 500 Operating Instructions Manual Download Page 6

6.  Security issues 

 

 

These devices should be used safely, against damage to property. 

 

Read the specific contents and make proper use of the information 

 

Stop the machine and immediately disconnect the plug , when the power cord is damaged or  plug 
is loose.  

Wipe the plug with dry clothing whenever there is water or dust on the plug 

Do not unplug the power plug of a sudden not touch it with wet hands 

If water or other items in contact with electrical parts of the machine, disconnect the plug and 
technical service call. 

Never handle or attempt to repair or rebuild the unit .( If you find any fault please contact the 
technical service) 

Do not use chemicals or detergents to clean the machine common 

Never connect 

the USB cable and power together

 in the Arduino board that could burn 

Please avoid placing the machine in places where humidification directly impacts on the ceiling, 
walls, household furnishings, televisions.  

Do not use this machine near a wall (A minimun distance of 10cm is required from a wall and 
100cm from the roof). 

 

 

 

 

 

 

 

 

 

Summary of Contents for Profesional 500










Reviews: