Cata Profesional 500 Operating Instructions Manual Download Page 3

1.  Introduction. 

 

Ideally, to get a healthy environment is to ensure that the room is well ventilated and the 
temperature must be between 20 ~ 22 ° C, also the humidity must be between 45 and 65 percent. 

It is  considered  that an environment is dry when the relative humidity is below 45 percent.

 

 

This product generates humidity through a water filter and a fan.

 

The cold moisture is not 

generated by water vapour, is generated through a filter moistened with water and exposed to a 
forced air circulation.  

This product lowers the temperature 5 ° C where the humidifier is located and increase the 
relative humidity to 15%.

  

The humidifier can be web-controlled and is configurable to different uses. 

 

 

 

 

 

 

 

 

 

ATTENTION INSTALLER: This product must be installed by a qualified  contractor. Failure to do so could 

result in serious injury from electrical shock. 

WARNINGS 

Failure to comply with the warnings listed above may result in electric 
shock or serious injury. 

This product should be used only in accordance with the specifications outlined in this 

manual. Usage other than what has been specified here may result in serious injury. 

Summary of Contents for Profesional 500










Reviews: