the ends overlap.
Do not use adhesive to fix the hob into the worktop.
Place the hob into the cutout in the worktop (F8). Apply gentle pressure downwards
onto the hob until it is fitted, ensuring a good seal around the outer edge.
Before you install the hob, make sure that
•
The work surface is level and made of a heat-resistant material. Also the walls near
the hob must be heat-resistant.
•
The hob will not be installed directly above a dishwasher, fridge, freezer, washing
machine or clothes dryer, as the humidity may damage the hob electronics.
•
The installation will comply with all clearance requirements and applicable
standards and regulations.
When you have installed the hob, make sure that
•
The power supply cable is not accessible through cupboard doors or drawers.
•
If the hob is installed above a drawer or cupboard space, a thermal protection
barrier is installed below the base of the hob.
•
Disconnect the appliance from the mains electricity supply before carrying out any
work or maintenance on it.
Connecting the hob to the mains power supply
(F9)
Wire colour code:
A) Black
B) Brown
C) Grey
D) Blue
E) Green/Yellow
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the
hob.
2. The voltage corresponds to the value given in the rating plate.
3.
The power supply cable sections can withstand the load specified on
the rating plate.
4.
The installation is fitted with an efficient earthing connection in line
with current regulations and law. The earth connection is a legal
requirement.
-
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
