further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function. It shuts down the cooking zone
automatically if you ever forget to turn it off. The default maximum working time for
each power level is shown in the table below:
Power level
1~3
4~6
7~8
9
Default working timer (hour)
360
180
120
90
When the cookware is removed, the display shows the power level during 5s and
then displays for 1 minute. After that it will display “H”, which means the surface of
cook zone is hot. Please do not touch it. When the surface has cooled down to a safe
temperature, it will display “-” for 1 minute, then the zone will automatically switch off.
Using the Timer
Timer function can be used in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
You can set the timer up to 99 minutes. If the setting time exceeds 99 minutes, the
timer will automatically return to 0 minutes.
Using the Timer as a Minute Minder
1. After selecting the cooking zone and the power level required (3), the dot
next to power level indicator will flash for 5 seconds.
2.
When the dot stops flashing, touch the timer (1), you can realize the setting
of timing from 1 to 99 minutes. Touch the key once if you want to increase/
decrease the time by 1 minute. If you touch and hold the key, then the time
will increase/decrease in steps of 10 minutes. To cancel the Timer, press
both keys (1) at the same time.
3. When the time is set, it will begin to count down immediately. The display will
show the remaining time and the dot next to timer indicator will keep on flashing.
4. Buzzer will bips and the timer indicator will turn off when the setting time
finished.
Setting the timer to turn one cooking zone off
1. Select the relevant cooking zone by touching the power level slider (3) to
set the power lever you required. The dot next to power level indicator will
flash for 5 seconds.
2.
Before the dot stops flashing, touch the timer (1), you can realize the setting
of timing from 1 to 99 minutes. Touch the key once if you want to increase/
decrease the time by 1 minute. If you touch and hold the key, then the time
will increase/decrease in steps of 10 minutes. To cancel the Timer, press
