HU-30
Removing and Cleaning the oven door
•
The oven door
is
equipped with three
glass
panels. You can remove the oven door and the
internal glass
panels to clean them.
•
The oven door could close again if you try to remove the glass panels before taking off the oven door.
CAUTION!
•
Refer to the chapters on safety.
REMOVING THE OVEN DOOR
1. Open the oven door completely
2.
Position the hooks "A" of the hinges outwards (Fig.7)
3. Slowly close the door
to
reach the hooks "A", making
sure
that they lock
in
the
slots "B"
of the door,
as
shown in Fig.8
4.
Using both hands, press lightly inwards
on
the door, allowing the door hinges
"C" to
detach from the
slots
"D" (see Fig.9), and pull the door towards yourself until it has unhooked from the oven.
5.
After cleaning, fit the door back
on
properly by following the procedure
in
reverse order. Reposition the
hooks “A” inwards before closing the door (Fig.10)
CLEANING THE OVEN DOOR
•
After removing the oven door from the framework, place
it on a
surface with the
inner glass
(double
glazing) facing towards yourself (Figure 3)
•
Remove the double
glazing
carefully by
raising it
approximately
25
degrees (Figure 4)
until
the
retaining
springs unhook
•
Push the double
glazing in
the direction of the arrow (Figure 5) and pull
it
completely
out in
order
to
proceed with cleaning. At this point you can also remove the middle glazing in the oven door (follow the
procedure of Figure 6) and proceed with cleaning.
•
When cleaning
is
completed, fit the parts back
on
by following the reverse procedure
to
that described
above to put the oven door back into its original condition.
A
A
A
B
A
C
D
A
Fig. 8
Fig. 7
Fig. 9
Fig. 10
Glass
Rubber
Fig. 3
Fig. 5
Fig. 6
Fig. 4
EN-13
