manualshive.com logo in svg

Cata ASOMA 600, Operation And Storage Manual, Page: 9 / 14

Share
Download
Cata ASOMA 600 Operation And Storage Manual Download Page 9

8

Troubleshooting

FAULT

POSSIBLE CAUSE

SOLUTION

Light on, but motor 

does not work 

•  Fan switch turned off

•  Fan switch failed

•  Motor failed

•  Select a fan switch 

position.

•  Contact service centre.

Light does not work, 

motor does not work

•  House fuses are blown

•  Power cord is loose or 

disconnected

•  Reset/replace fuses.

•  Refit cord to power 

outlet. Switch power on.

Oil leakage

•  The one-way valve and 

the outlet are not tightly 

sealed

•  Leakage from the 

connection of chimney 

and cover

•  Remove the one- way 

valve and seal with 

sealant.

•  Remove the chimney 

down and seal the 

connection.

Lights not working

•  Broken/faulty globes

•  Replace globes as per 

the instructions later 

in this manual.

Insufficient suction

•  The distance between 

the cooker hood and 

the gas top is too great.

•  Refit the cooker hood 

at the correct dis-

tance.

The cooker hood 

inclines 

•  The fixing screw is not 

tight enough

•  Tighten the hanging 

screw and make it 

horizontal.

Maintenance and Cleaning

• Before maintaining or cleaning is carried out, the cooker hood should 

be disconnected from the main power supply. Switch off the cooker 

hood at the wall socket and plug removed.

• As the external surfaces are susceptible to scratches and abrasions, 

please follow the cleaning instructions to ensure the best possible 

result is achieved without damage.

• Never immerse the appliance in water – this could be fatal.

Summary of Contents for ASOMA 600















Reviews:

No comments