7
2. To set the speed, touch this area
with your
finger sliding it. If your finger stops at the first or second points, the
appliances motor will run at the lowest speed; if your finger stops
at the third or fourth points, the motor will run at the second speed;
if your finger stops at the fifth or sixth points, the motor will run at
the third speed; if your finger stops at the seventh or eighth points,
the motor will run at the highest speed.
LIGHTING
1. After the hood slides up, the lights will turn on automatically in 8–10
seconds.
2. If you touch the light button , the lights will turn on. If you touch
the light button again, the lights will turn off.
3. When you touch the light button , the pilot light will flash. Use
the slide button to control the light intensity while the pilot light is
flashing. There are 8 levels of lighting to choose from: each position
on the slide increases the light intensity. You can also change the
light intensity manually by touching the light button .
4. The pilot light will stop flashing after 15 seconds if there no further
adjustment.
TIMER
1. Touch the timer button when the appliances light or motor is
working. When the pilot light of the timer is flashing, use the slide
to select the timer range. The eight time settings are: 5-10-15-20-25-
30-35-40 minutes.
2. The motor and light will turn off automatically when the timer
finishes; the hood will go into standby mode and the decorative
cover will close automatically.
3. To use the timer function again while power is still running, touch
the timer button . The hood will use the same time that was
used last time. It will decrease by one setting after 5 seconds of
inactivity.
4. If you touch the speed button
or change the light intensity when
the timer is working, the timer function will cancel automatically.