18
your baby (
fig.13
). Bear in mind the baby’s weight when choosing the position of
the backrest in the vehicle.
Positions in the vehicle (fig. 14):
Lying down:
up to 5 Kg. weight.
Intermediate 1:
to 5 kg in weight with or without basis Prima fix.
Intermediate 2:
5 -10 Kg with or without basis Prima fix.
Sitting:
from 5 Kg. up to 10 Kg. weight.
NOTE:
Out of the vehicle you can choose any position up to 9 Kg.
Fitting and removing the hood (see illustrations 15 - 16)
• Fit the hood inserting the ends of both sides in the slots on the sides of the frame
(fig. 15)
.
• Position the slots of the hood leaving the upper belt guides uncovered. Fasten the
side buckles to the foot cover
(fig. 16)
.
• Remove the hood by following the instructions in reverse order.
Removing the upholstery (see illustrations 17 - 23)
• Remove the foot cover, undoing the buckles and releasing the hooks on the sides
of the frame
(fig.17 - 19)
.
• Remove the hood.
• Open the fastening buckle. Remove the chest protectors and the baby cushion
pad
(fig. 20)
.
• Pass the harness straps through the upholstery slots
(fig. 21)
.
• Remove all the upholstery from the edges starting with the lower part, paying
special attention to the part that covers the TMS
(fig. 22)
. Lastly, release the
upholstery upper hook on the frame
(fig. 23)
.
UNISYSTEM (see illustrations 24 - 26)
• This exclusive fastener system means that the
Prima Easy
can be used with the
following strollers:
Vintage, Vintage 2, Vintage 3 Downtown, S4, S4 Reverse,
Jazz
Fitting the PRIMA on the pushchair (see illustrations 24 - 25)
• Put the parking brake on (
fig. 24
).
• Place the Prima on the pushchair facing backwards. Line the UNISYSTEM
connectors up with the slots. Press downwards until it clicks indicating that
it is fastened, (
fig. 25
) and a green signal appears in the side window of the
couplings.
Removing the PRIMA (see illustration 26)
• Press and then release the red button on both couplings (
fig. 26
) (the red signal
will appear in the window) and pull upwards to release it from the chassis.
WARNING:
Check that the fastening devices of the Prima and the pushchair are
correctly activated before use.
Summary of Contents for PRIMA EASY
Page 2: ......
