11
Instructions for use
OPENING THE PICOROCO
(diagrams 1-2)
• Hold the lower part of the hammock while pressing the opening button
on the top part. Pull the front tab upwards (fig.1).
• Pull the front tab upwards, while using the other hand to hold the bottom
part of the Picoroco (fig.2). It will click when correctly fastened.
FITTING THE MATTRESS PAD
(diagrams 3-5)
• Unfasten the buckle of the safety harness, pressing the grey button in
the middle. (fig.4)
• Place the mattress pad on the Picoroco and insert the crotch strap
through the central vent. (fig.3-4)
• Place both straps in the corresponding shoulder pads and fasten them
in using the Velcro on the pads. (fig.5)
SAFETY HARNESS
(diagrams 4-6)
WARNING:
Always use the restraint system.
• Before placing the child in the Picoroco making sure that the buckle is
unfastened. To do this, press the middle button and separate the two
clips. (fig.4)
• Place the child in the hammock and adjust the length of the straps
(shoulders and crotch strap), by pulling the end of A and part B. The
harness should be fitted to the child’s body but without being too tight.
• Lastly, insert the two clips into the slots in the buckle, it will click when
correctly fastened. (fig.6)
ADJUSTING THE BACKREST
(diagrams 7-8-9 )
NOTE:
The backrest of the PICOROCO has two reclining positions.
WARNING:
Any adjustment to the hammock (changing the position of the
backrest, carrying) should be made when the child is not using it.
WARNING:
Check that the backrest is correctly locked into one of the two
reclining positions before placing the child in the hammock.
• Take the child out of the Picoroco.
• Press the button on the bottom part of the Picoroco,(fig.7) and place